This architecture of earthquake resistant buildings review is very useful for residents who live in earthquake areas. They need access to architecture of earthquake resistant buildings. So they can customize the available resources with architecture of earthquake resistant buildings.
Our previous writings have examined the damage to buildings caused by earthquakes. We have also studied the concept of the simple earthquake-resistant building. This is important for people living in earthquake-prone areas.
Simple earthquake-resistant residential buildings in an architectural review include three things: the discussion of design, roof and wall building openings.
Architecture of Earthquake Resistant Buildings – Design.
Building design should have a symmetrical shape because this form can eliminate the effect of torsion. Simple symmetrical design forms, among others, squares and rectangles.
But we can choose a symmetrical design that is not simple for our home. The shape of the circle and the many facets is including the design of a symmetrical shape that is not simple.
Buildings that have an asymmetrical design should be separated into sections that have a symmetrical shape.
You must separate the L-shaped building into two square and rectangular buildings. You should also separate the T-shaped building into 2 or 3 square-shaped symmetric designs and rectangles.
To avoid twisting effects on buildings, you must separate the asymmetric shape into a symmetrical shape.
Design that is too long will reduce the strength (performance) of buildings if there is a decrease in buildings and differences in movement behavior. This is due to the effects of non-structural reality and the reality of loading. Therefore, you should separate buildings according to the conditions of land and building uniformity.
For example the building is too long then you have to separate into 2 or three sections of the square shaped building.
Architecture of Earthquake Resistant Buildings – Roof Building.
Basically, roof forms that are too big and too heavy can endanger the security of the structure as it can lead to larger earthquake loads. Therefore, roof buildings should use lightweight roofing materials such as zinc, asbestos or aluminum. You should tie the asbestos or zinc roofing material on gording with nails, iron plates or bolts.
For areas one and two, when using a roof tile should be tied to the batten. While on the tile that has a hole can be tied to a nail. The tile that does not have a hole should be tied every 4-lane roof with wire fastener.
Overstek usage that is too long can cause the center of the building to shift from the center of the building. Long oversteks are also vulnerable (more risky) to earthquake-shaking vertical directions.